autoLAM

Vehicle Laminate

Optically Clear Cast

Better Value - Lower $

No Fuss Warranty

Matches to OneVue, AutoVue and PromoVue

OVERVIEW

AutoLam is a premium cast vinyl optically clear overlaminate for our range of polyermic calendered perforated One Way Vision films. The benefits of overlaminating one way vision include:

  • Prevents rain from coagulating in the holes (refer to the photo above)
  • Protects graphic from dirt and grime build up
  • Protects graphic from rubber markings caused by the rear wiper 
  • Protects graphic from regular cleaning, pollutants and water 
  • Protects graphic by absorbing most UV radiation 
  • Gives the graphic vibrancy – gloss look


What makes AutoLam stand apart from other laminates in the market is its exceptional clear vision properties, even when the angle of the windscreen is acute.  Unlike other laminates which become less clear and more milky as the angle of the windshield increases, Clear Focus AutoLam remains crystal clear.

The other major differentiating factor is that AutoLam is conformable on curved windscreens.  It does not crease, crinkle, tunnel or lift off when installing over the curved sections of the rear windscreen.  It will conform to the shape of the windshield without needing heat.  This is a welcome relief for installers. 

MATCHING ONE WAY VISION

AutoLam is an overlaminate designed for specific One Way Vision films.  AutoLam is matched to work successfully with AutoVue, PromoVue and OneVue.

WHERE TO APPLY?

Primary Locations 
  • Cars, vans and utes so that the rain beads and runs off the laminate, in order not to block or reduce the rear vision of the driver. 
Other Locations 
  • Shops and office windows to extend the life of the printed image for as long as possible. 

TECHNICAL INFORMATION

 SKU


Adhesive

Backing Liner

Vinyl

Thickness

Durability

Ink Compatibility

1370mm wide:  ALPL50
1520mm wide:  ALPL5060

Solvent optically clear high tack removable polyacrylate 

PET matte finish

Cast gloss flexible PVC cold-laminating film

50 microns

5+ years

Printable on Eco-Solvent/Latex/UV-Cure ink printers

RECOMMENDATIONS

For AutoLam, we recommend the following:

  • Apply to AutoVue, PromoVue or OneVue using a cold-press flat-bed laminator machine;
  • Apply dry to window after 24 hours of laminating;
  • To transport, roll printed graphic outwards with a diameter of at least 150mm;
  • Do not use the wipers or demisters for at least 1 week after installation;
  • Clean the graphic with mild soap solution, sponge and garden hose.

SUPPORTING DOCUMENTS

CFOWV AutoLam Data Sheet as at 2024-01-01.pdf CFOWV AutoLam Data Sheet as at 2024-01-01.pdf
Size : 226.553 Kb
Type : pdf
 

© Clear Focus One Way Vision. All Rights Reserved.