OptiTape is not a perforated One Way Vision film. It is a mounting film. This means it is a special film that laminated to a printed substrate, such as BannerVue, RetailVue or even fluted board, foam board or poster paper. As OptiTape is a double sided adhesive film, one side will adhere to the printed graphic and the other side will adhere to a glass surface. This allows for light non-adhesive substrates to be interior mounted to windows.
OptiTape is optically clear, to provide maximum clarity to the printed image. For the average person walking by, they will most likely not see the mounting film but instead see the advertising graphic when applied to a window or glass door.
MATCHING ONE WAY VISION
OptiTape is a mounting tape film designed for specific non-adhesive One Way Vision films. OptiTape is matched to work successfully with BannerVue, RetailVue or PosterVue.
WHERE TO APPLY?
- Shop and office windows
- Glass doors
- Point of purchase/sale (POP/POS) areas
- Fluted board and foam board, to interior mount onto glass panel
- Paper posters to interior mount onto glass panel
OptiTape is an optically clear polyester PET double sided adhesive coated mounting tape film. One side is coated with permanent adhesive, identified by it's frosted liner. The other side is coated with a low tack removable adhesive, identifiable by the clear liner. OptiTape is available in 1355mm width roll.
For OptiTape, we recommend the following:
- Laminate permanent adhesive side of OptiTape to print side of substrate.
- Cover the entire substrate with OptiTape.
- Wet apply to a window using plain water. Do not mix with detergent.
WHERE TO BUY
OptiTape is available in Australia through all of our authorised distributors. To specify OptiTape for your project, please use the following specification clause:
For building windows/doors: Clear Focus One Way Vision OptiTape
© 2019 Clear Focus One Way Vision. All Rights Reserved.