AutoVue is one of the most popular One Way Vision products. It is the ideal "All Rounder". Suitable on any window, even ordinary passenger cars. This is because it complies with the Visible Light Transmittance (VLT) rules as governed by legislation in every Australian State. Other VLT compliant films for passenger cars are SuperVue and JetVue.
Why risk your business and hard earned profits by using a non-complying film, either on your cars or your customers cars? If a non-complying film is found to be on a car, the police or transport department can issue a defect notice and a fine. If the car is involved in an accident, insurance companies may take action against the car owner and the sign print business who installed it, or at least not pay a claim. As well as the police who may take additional action if they deem the non-complying One Way Vision was a contributing factor to the cause of the accident.
Play it safe, legal and ethical, by using AutoVue for passenger cars such as sedans, wagons, hatches, 4WDs, SUVs, coupes and utes. The great advantage with AutoVue is that it works just as well on shop and office windows too. This one film is suitable for all and any transparent surface, whether it be a short or long term advertising campaign.
Matching overlaminate is Clear Focus CurvaLam. For passenger cars, we strongly recommend to overlaminate, so that the driver can continue to have an unobstructed view out through the rear windscreen when it rains.
WHERE TO APPLY?
- Rear windscreen of passenger cars, such as sedans, hatches, station wagons (excluding New Zealand)
- Rear windows (behind the driver) of goods carrying vehicles, such as vans and utes
- External windows of shops and offices
- Any other kind of vehicle, such as campervans, trucks, limousines etc
AutoVue is a polymeric calendered PVC perforated window film. It is white on the printable side and black on the adhesive side. AutoVue has a 2mm perforation hole, which is the largest hole size in our range. For every square metre of film, 50% of the film has been perforated. The combination of 2mm hole size and 50% perforation pattern gives AutoVue the highest Visible Light Transmittance value (39.2%) in our range of films. This means that it provides the most "see-through" property for the driver of a vehicle.
AutoVue is available in 1370mm and 1520mm width rolls. There is a choice of two liners. Universal Liner, which is printable in the solvent, latex and UV-cure ink printing machines. Alternatively, AutoVue is also available in the SL liner, which is only printable in the solvent and latex machines. The SL liner is a single layer paper liner, which is more suited to the heat in latex printers.
If you are new to applying One Way Vision to vehicle rear windscreens, or the vehicle rear windscreen is highly curved, we suggest Clear Focus SuperVue, as it is more flexible, making it easier to apply and go around curvatures.
For AutoVue, we recommend the following:
- Apply to vehicle rear windscreens only, do not apply to side windows;
- Apply to vertical or near vertical rear windscreens, do not apply if angled below 55 degrees;
- Apply to windscreens that have not been tinted;
- Laminate with CurvaLam;
- Follow our general instructions.
WHERE TO BUY
AutoVue is available in Australia through all of our authorised distributors. To specify AutoVue for your project, please use one of the following specification clauses:
Clear Focus One Way Vision AutoVue Universal Liner + Clear Focus CurvaLam
Clear Focus One Way Vision AutoVue SL + Clear Focus CurvaLam
CFOWV AutoVue Data Sheet.pdf
Size : 179.187 Kb
Type : pdf
Why Laminate - Rain.pdf
Size : 345.36 Kb
Type : pdf
OWV Safety Fact Sheet (Angle vs Vertical).pdf
Size : 622.206 Kb
Type : pdf
OWV Safety Fact Sheet (Tinting).pdf
Size : 478.075 Kb
Type : pdf
© 2019 Clear Focus One Way Vision. All Rights Reserved.